about Hydraulic packer How much do you know and what is used for? Do you know the operating procedures and troubleshooting?
Hydraulic baler is mainly used in steel plant, crop straw, recycling and processing industry and nonferrous, ferrous metal smelting industry. The hydraulic baler can extrude all kinds of metal scraps (steel shavings, scrap steel, scrap aluminum, scrap copper, waste stainless steel and scrap automobile waste) into cuboid, octagonal, cylinder and other qualified furnace charges, i.e. I can reduce the transportation and smelting costs and enhance the furnace charging efficiency.
Four operating procedures for hydraulic baler:
1. The materials for setting up the hydraulic packer must be qualified after inspection, and there are deformation, cracks and other defects in the hydraulic packing rack, the connecting parts and fasteners are not allowed to be used, and the fasteners and connectors of the hydraulic baler shall not be repaired by welding.
When the base plate is compacted, the base plate should be leveled, and the foundation should not be hard and flat.
3. The hydraulic packer shall be erected according to relevant standards and regulations (the hydraulic packer shall be horizontal and vertical, and the span and spacing shall meet the specification requirements). No matter how high the hydraulic packer is set up, it is not allowed to have unstable conditions.
4. The springboard on the hydraulic packer should be laid neatly, and the width and length should be consistent. The springboard on the hydraulic packer must be fixed firmly, and there should be no large holes on the platform surface.